Run the engine until it's up to operating temperature (at least 160*f) slowly work the idle speed down to about 950rpm.31 kpa idle at 3000rpm:
Map mad hyundai elantra 1.8 lt 2015.At idle you are around 30% air or 30 kpa.At idle, the op has measured from 3.9 to 4.4 psia.
I have right at 60 with the 383 and 306 cam at a 950 rpm idle.Its main purpose is to monitor and transmit real time information, about the pressure inside the manifold.
Are you fixing your elantra yourself?See also the comprehensive guide to wifi door alarm sensors:Samething,idles around 85kpa but manual gauge reads 10 inhg.
When throttle is at ~25%, engine load is at ~55% and engine speed is at ~2000 rpm, i can see the map at ~70 kpa.Engine vacuum is the difference between baro and map reading.
Ordered and installed a zl1 map sensor and changed the values.This data is in the new sniper 2 datalog view when i expand out the left part of the window, i don't recall seeing the min/max/avg/standard deviation before!